Disabled Vehicle Adaptions, Turny

For an Overview of the Turnout Advantages and Accessories Click Here

Turnout is available for both right or left side installation

Turnout is a swivel base which makes it possible to turn the seat out over the car's doorstep when entering and exiting the car.
The base is mounted on the adapted bracket, which itself is mounted on the car's original foundation on the floor.
A low built seat, such as a BEV seat, is mounted on the swivel base. The BEV seat is designed for maximum leg and head space.

Turnout 2 is designed for cars with two doors and Turnout 4 is designed for cars with four doors.

Both models can easily be installed in the majority of car models available on the market.
Both Turnout 2 and Turnout 4 can be mounted on the driver or passenger side.

Turnout is an improved edition of the Caro swivel base. Many years of experience has been taken into its development.
The result is a new swivel base which appeals to both the user and the installation technician.

Using the swivel base simplifies day to day living for the user who has reduced mobility as well as saving the back strain of the person who helps with the lifting in and out of the car.
The goal has been to develop a well-designed, crash safe, easy mountable and functional swivel base. We believe that we have succeeded.

Manual manoeuvring
	First release the safety catch on the side of the seat...		...Then turn the seat out to the outer catch position

Turnout 2E and 4E: Turnout with electrical manoeuvring

The manoeuvring of Turnout 2E and Turnout 4E is done with an easy to use hand control which give the possibility of a variable height stopping position.
The control can be hung up or put beside the seat when not being used.

Electrical Manoeuring
	First, take down the hand control and push the button...		......Then turn the seat out to the desired position

Electrical manoeuvring for after-market mounting

Turnout 2 and 4 manual can, if needed in the future, be supplied with a Turnout Power Kit. The Turnout Power Kit consists of a gear ring, an electrical motor and a manoeuvring box.Installation must be done at a Autoadapt-BEV authorised workshop.

- Close Window -